If there is one thing that homeowners, as well as builders, would want to know when they are trying to join decorative or structural iron beam straps with timber, that would be how they would be able to choose the best wood connector iron face plate size for exposed beams. To get more info, click decorative joist hangers . If you are going to have a new construction project, take note that you will need the service of an engineer or even an architect since they are the ones capable of specifying all the requirements needed for your application, which may include width, minimum thickness and also, size for the iron faceplates. Not only that, it has been said as well that engineers and architects will take the job of specifying the diameter and even the length of the fasteners (can either be bolts or lags) which are used to attach the wood construction tie, that determines the structural value of the post beam connection. You may not know it but lags and bolts are different from each other in terms of structural value in such a way that lags only has a pull out value that enables it to be rated as a grade five in structural integrity wherein bolts can be graded as eight since it can be bolted through the beam with the use of a nut n the other side.
Now, if you are going to choose the right size for a wood connector iron faceplate that you will be adding to your existing beam structural as you want an additional support, there are quite a number of things that you have to consider like keeping in mind all the time about how you are simulating a structural beam support. To get more info, visit decorative beam hangers . In line with this, what you can possibly do best is to make sure that the size is enough so that your support beam will come out as something that truly has a structural value. For sure, you are thinking about how you can possibly get the right size of your wood connector iron faceplate and what we can say is that you can do so by cutting a template out of a piece of paper and then have it stapled, tacked or even taped to your beam. You can also start by cutting a template having the sizes of two inches wide and eight inches long or tall.
The next thing that we want you to do so you can get the right size for your wood connector iron faceplate is to paint your template black in order for you to visualize it or you can use a black poster board, and if you are worried about the design, you should now since the focus of this is getting the basic size. Learn more from https://en.wikipedia.org/wiki/Biscuit_joiner.